TL;DR
Maker Jagi Natarajan has published a detailed build log of ‘Phyllotaxis,’ a wall-mounted LED display whose cells are arranged in the double-spiral pattern found in sunflowers. An STM32 microcontroller and digital microphone let the 89-LED piece react in real time to sound in the room.
Maker Jagi Natarajan has published a build log of “Phyllotaxis,” a physical LED display whose 89 light cells are arranged in the double-spiral pattern seen in sunflower centers, and which reacts in real time to audio in the room through a digital microphone and on-board frequency analysis. The report, posted on his site jagi.studio, walks through the entire process: generating the pattern in code, converting it into printable 3D geometry, soldering the LED array, and writing the embedded software that animates it.
Get art and craft supplies delivered free with Prime
- Fast, free delivery on millions of items
- Prime Video, Amazon Music and more included
- Member-only deals all year
The project began as a software experiment. Natarajan wrote a short Processing sketch that places points along a radial line and rotates each by successive multiples of the golden ratio (approximately 1.618). The resulting point cloud, he writes, “already looks very much like a sunflower.” Applying a Voronoi tessellation to the points turned them into a seed-pod-like grid of irregular cells.
He then moved from screen to physical object. Using the CadQuery Python library, he constructed 3D geometry from the exported cell edges: the code subtracts a slightly shrunk copy of each cell from the merged whole to form walls, then carves an LED-sized hole at the center of every cell. The geometry was split into four quadrants to fit his 3D printer’s bed, post-processed in FreeCAD with screw holes and a thin “faceplate” version, and backed with translucent mulberry paper chosen for its organic, light-diffusing fibers.
Electronically, the display uses 89 addressable RGB LEDs soldered by hand — a process Natarajan describes as “kinda tedious” but eventually relaxing — driven by an STM32 “blackpill” board via a NeoPixel driver he wrote using SPI. For audio reactivity, he added an INMP441 digital I2S microphone, which he notes avoids analog noise, and used the ARM CMSIS library to run a Fourier transform, auto-gain control, and multiband splitting so the display responds to energy at different frequencies. The final piece is mounted on a bamboo cutting board routed into a circle, with the controller housed in a 3D-printed box that includes a guitar pedal switch.
Why a Hand-Built Spiral Display Matters
The project is a concrete example of a growing trend in the maker community: generative math patterns translated into physical hardware. Phyllotaxis — the arrangement of leaves and seeds in plants — can be reproduced with a handful of lines of code, and Natarajan’s build shows a complete, reproducible path from that math to a printed, soldered, wall-mountable object.
It also demonstrates what low-cost microcontrollers can now do for real-time audio analysis. Because the STM32 board includes floating-point support and ARM DSP instructions, it can run a Fourier transform and multiband frequency splitting locally, with no computer attached — allowing the display to respond to music dynamically rather than playing back fixed patterns. Natarajan writes that the audio-reactive program that emerged from this work “is still the basis of what runs on the board to this day.”
For readers interested in building something similar, the write-up doubles as documentation: it includes the core pattern-generation code, the CadQuery geometry snippets, and the shader-style LED animation framework he built on top of a position lookup table.
Popular right now

Dyson Airwrap Co-anda2x Multi-Styler and Dryer (2026 Model)

Roborock Q7 M5+ Robot Vacuum and Mop with Self-Emptying Dock

Shark AI Ultra Robot Vacuum with Matrix Clean and Self-Empty Base
As an affiliate, we earn on qualifying purchases.
From High School Matrix to Phyllotaxis
Natarajan writes that he had built a rectangular NeoPixel matrix in high school but had “been waiting to find a more interesting shape for the next one.” The phyllotaxis experiment supplied that shape. After tessellating the spiral point cloud into cells, he had the idea to “put an RGB addressable LED in each cell” — creating what he calls a kind of cellular LED matrix rather than the usual grid.
To make animation code approachable, he built a simple sketch framework in which each LED’s floating-point position is precomputed in a lookup table as if on a unit circle. That lets him write fragment-shader-style code — for example, a “radial_spirals” routine that combines polar coordinates and a sine wave to pulse brightness outward from the center. He writes that this pulsating radial pattern became the primary feature of the later audio-reactive sketch, which he says first “came alive listening to Jon Hopkins’ Neon Pattern Drum.”
Details Cut Short in the Write-Up
The published report appears to end mid-sentence: Natarajan notes that the perfboard electronics were “janky and prone to noise that would cause th—” before the text breaks off. It is unclear whether the noise issue was later resolved, and the details of what the guitar pedal switch controls and how the final enclosure behaves in long-term use are not fully documented in the material available.
The write-up also does not state whether complete source files — the CadQuery models, firmware, and audio-reactive sketch — will be released publicly, nor does it give a parts cost, total build time, or power consumption figures. Whether Natarajan plans further versions of the display, such as a larger cell count or refined electronics, is not mentioned.
Possible Follow-Ups for the Project
No formal roadmap is given, but the write-up’s unfinished ending suggests a tidying-up section still to be completed, likely covering the mounting and controller box. Readers wanting to replicate the build can follow the documented pipeline — Processing sketch, CadQuery geometry, FreeCAD post-processing, STM32 firmware — using the code snippets Natarajan includes. The audio-reactive program he describes continues to run on the board, and any future updates would presumably appear on his site, jagi.studio, where the original report is hosted.
Key Questions
What is phyllotaxis?
Phyllotaxis is the arrangement of seeds, leaves, or florets in plants, most visibly the double-spiral pattern in the center of sunflowers and succulents. In code, it can be generated by spacing points along a radial line and rotating each by successive multiples of the golden ratio.
How many LEDs does the display use?
The build uses 89 addressable RGB LEDs, one mounted in each cell of the Voronoi-tessellated spiral pattern. Natarajan soldered all of them by hand.
How does the display react to audio?
An INMP441 digital I2S microphone captures sound. The STM32 board runs a Fourier transform and multiband energy analysis using the ARM CMSIS library, with auto-gain control, so different frequency bands drive the animation dynamically — no computer connection is required.
What hardware and software tools were used?
The build used Processing for the pattern sketch, CadQuery and FreeCAD for the 3D geometry, a 3D printer for the four quadrant shells and faceplate, an STM32 blackpill board as the controller, and mulberry paper as a light diffuser, all mounted on a routed bamboo circle.
Is the source code available?
The report includes key code snippets for the pattern generation, the CadQuery geometry, and the shader-style LED animation framework, but it does not state whether a complete repository of files and firmware will be published.
Source: hn
